boltInstant · No signup · No AI credits

Beam Deflection Calculator

Max deflection and moment for simply supported and cantilever beams, with an L/360 check.

δ = 5wL⁴ / 384EI · M = wL² / 8

Steel 200 · Aluminium 69 · Timber 8–12

IPE 300 ≈ 8,356 cm⁴ · W10×22 ≈ 4,790 cm⁴

360 floors · 240 roofs

Results

Max deflection

10.10 mm

Ratio

L / 594

Max bending moment

45.00 kN·m

Check (≤ 16.7 mm)

Passes

Simply supported, uniform load: max deflection ≈ 10.1 mm (L/594), max moment ≈ 45 kN·m. Within the L/360 limit of 16.7 mm.

Next step

Turn the check into a calc sheet

Your result goes with you, so there's nothing to retype.

engineeringEngineering screening only. Engineering screening calculator only — not a substitute for licensed professional engineering, API/ASME/code-compliant design, certified reserves audits, regulatory well approvals, or field-measured PVT and flow data. Verify all inputs, units, and correlations against your facility standards and qualified sign-off before operations or design decisions.

What this means

Serviceability checks

rule

Common limits

L/360 is typical for floors under live load, L/240 for total load or roofs, and L/180 for cantilevers measured on span. Your code and client spec decide.

straighten

Units that trip people up

I is in cm⁴ here (1 cm⁴ = 10,000 mm⁴). Steel E is about 200 GPa, aluminium about 69 GPa and softwood timber about 8–12 GPa.

Need expert help?

Turn the check into a calc sheet

Document Studio formats load cases, assumptions and results into a review-ready calculation package.

psychologySpecialist: John — Business Analyst

Sign in to chat with John and turn this into a full plan in the studio.

Deflection usually governs before strength does

A beam can be strong enough and still sag too much for finishes, glazing or machinery. Serviceability limits like L/360 for floors and L/240 for roofs exist for that reason.

Deflection scales with the span to the fourth power under uniform load. Doubling a span makes it sixteen times worse, which is why depth (and so I) matters more than material.

This tool covers the four textbook cases. Continuous spans, partial loads and composite action need a full analysis.