boltInstant · No signup · No AI credits

Gas Material Balance (p/z) Calculator

Fit p/z against cumulative gas and read OGIP where the line hits zero.

Pressure surveys

Gp (Bcf)p (psia)z
0251350270.015294458Cumulative gas, Gp (Bcf)p/z (psia)OGIP 55.4 Bcf

Results

OGIP

55.4 Bcf

Recoverable to abandonment

49.1 Bcf

Recovery factor

88.7%

Fit (R²)

0.996

p/z line: 4654 psia at Gp = 0, falling 84 psia per Bcf. OGIP ≈ 55.4 Bcf; ≈ 49.1 Bcf recoverable to 500 psia abandonment (R² 0.996).

Next step

Check the fit against volumetrics and water drive

Your result goes with you, so there's nothing to retype.

engineeringEngineering screening only. Engineering screening calculator only — not a substitute for licensed professional engineering, API/ASME/code-compliant design, certified reserves audits, regulatory well approvals, or field-measured PVT and flow data. Verify all inputs, units, and correlations against your facility standards and qualified sign-off before operations or design decisions.

What this means

Is your p/z line trustworthy?

show_chart

Watch the curve

Points bending upward over time usually mean water influx. A straight-line fit will then overstate OGIP, sometimes by a lot.

speed

Use stabilised pressures

Fit only shut-in surveys that reached stable reservoir pressure, with z-factors at reservoir temperature from a PVT model or correlation.

Need expert help?

Check the fit against volumetrics and water drive

Spreadsheet Studio with Caleb builds the p/z plot, Havlena-Odeh checks and reserve cases from your survey data.

psychologySpecialist: Caleb — Petroleum Engineer

Sign in to chat with Caleb and turn this into a full plan in the studio.

Why p/z is a straight line, and when it isn't

For a closed, volumetric gas reservoir, material balance reduces to p/z = (pi/zi) · (1 − Gp/G). Plot p/z against cumulative production and the line reaches zero at the original gas in place.

If the points bend upward and flatten, water influx is supporting pressure and a straight-line fit will overstate OGIP. Overpressured reservoirs can bend the other way early in life.

Use at least three reliable shut-in surveys, and compare the answer with a volumetric estimate.